My upcoming quilt retreat has a project bag exchange as one of the activities. It’s optional. Attendees can make or buy a bag for the swap. I considered buying a project bag from my largest local quilt shop to take. That is, until I saw a YouTube video showing how simple they are to make.
My project bag finishes at 10″ x 13″. I merely made it the same size as my favorite ready-made vinyl project bag.
This was my first attempt at making the bag. I used random vinyl I found in my stash along with leftover fabrics from samples I’d made for the Beginning Sewing classes. This bag was constructed entirely on my 301. I will say that I learned a lot about my 301 during this project. I also chose to attach the binding separately rather than doing the self-binding method shown in many tutorials.
This was my second attempt. Much better! I used By Annie 16 gauge vinyl in this one. OMG, what a difference! I also used my Elnita EC30 with a walking foot to do the sewing. In hindsight, a red or yellow zipper would have added a little more zing to the bag, but my options at midnight were limited to what I had on hand in the correct length.
Supplies you’ll need to make my version:
Zipper: regular nylon zipper minimum 14″ length (longer is actually better)
Fabric for zipper insertion: (1) 2″x13″ strip and (1) 4″x13″ strip
16 gauge vinyl for front: (1) 8-1/2″ x 13″ (leave tissue paper on)
Quilted piece for back: 10″x13″ (make a quilt sandwich with 2 FQs and quilt with a simple design; trim to size)
Binding: (2) 2-1/2″ x WOF strips
Make front piece: Fold 2″ strip in half lengthwise and press. Fold 4″ strip in half, bring raw edges to middle and press. Fold over again and press (similar to making a strap). The single folded edges will be sewn to the zipper. The vinyl will be inserted into the double folded edges and topstitched in place. Here’s a video with a good explanation of how to sew the zipper and add the vinyl piece on the front. Start watching about the 19:20 mark in the video.
Assemble bag and bind: Lay the front piece on top of the back piece. Align raw edges and baste in place all the way around. Trim away excess vinyl, if necessary. Attach binding using back-to-front method (leave tissue paper on vinyl). Tear away tissue paper after attaching binding. Fold binding edges to the front. Use wonder clips to hold binding in place, fold miters for corners and stitch.
Wonder Tape (wash away 1/4″ wide double-sided tape) really helps with the zipper installation. I may also try using a tearaway stabilizer or tissue paper underneath when attaching the zipper to the folded fabric edges. Wonder Clips are a must as pins will leave holes in the vinyl. Also, tissue paper is a necessity when sewing requires the vinyl to be next to the feed dogs – when you are attaching binding to the back and flipping it to the front to sew down. It keeps the vinyl from sticking and/or getting caught in the feed dogs.
No vinyl? No problem. Use a quilted fabric panel for the front piece instead of vinyl.
Since I didn’t have to buy anything to make these bags, I consider these projects as freebies. (Yes, it did take 45-60 minutes per bag to make). This means more $$ for shopping at my upcoming retreat!
Come Stitch With Me 