What you see above is a modified zigzag plate for a Baby Lock Jubilant sewing machine. Yep, I now have my very own straight stitch plate. And it works marvelously, too! A little JB Weld SteelStik, toothpick, masking tape, gloves and a paper towel were all it took. Oh, and you will need an additional zigzag plate to modify. This video explains the process. Hubs thought the putty would be easier to work with than the usual tubes you have to mix to make the epoxy. He was right. Drying time was an hour. I filed off any extra using emery (metal) sandpaper from Home Depot and my honing stick from The Featherweight Shop.
So far so good. No error messages after installation of the modified needle plate. The machine stitches fine with no residue appearing on the thread or the fabric. Best of all? No more chewing fabric when I start stitching.
I reached out to Tacony and my local dealer a few times about a straight stitch needle plate option for the Jubilant as their existing straight stitch needle plate only works with machines having an 8″ or larger throat plate. Their response was to use a leader or starter strip. That didn’t work so well for me. I showed the video to hubs and he encouraged me to try it. After all, I’d modified needle plates for my Janome 8900 with success!
A straight stitch needle plate really does make a difference in my piecing and patchwork.
Come Stitch With Me 