Unfortunately, the schedule did not work out for a week-long sewing camp this summer. Too much going on between VBS, assorted camps, summer school, vacation and what the quilt shop already had on the books. It’s also a shortened summer break due to the adjusted school calendar.
Someone suggested project classes in June and July. Three come to mind: (1) pillowcase for brand new stitchers; (2) t-shirt pillow upcycle project and (3) zippered pouch/journal cover with initial monogram/applique.
What do you think about monthly kid-sew classes starting in August?
My sewing club kids worked the sewing machines over this past school year!
One of the machines, a JW 5622 from Wal-Mart, wound up with broken and bent spool spins. (Well, they are made of plastic, so what else do you expect when a dozen 9 & 10 year olds use the machines over the course of 28 weeks?) I decided to replace the the plastic pins with metal ones.
Normally, this would mean taking the machine to the repair shop and shelling out $90 for a basic service and less than 2 minutes of time to swap out the spool pins. Not this time. Mechanical machines I can do. I rehabbed a Singer 99K and maintain my Featherweight. Both run perfectly. Parts were available online, so I decided to DIY.
But first, I needed 2 things: a service manual* and 2 metal retractable spool pins. (* This one was free from Janome and is a basic service manual for several variations of this model available through online retailers and big box stores. Service-Manual.net is a reliable resource for purchased sewing machine service manuals. Most are about $10 and include the parts list.)
Surprisingly, there was no mention in the service manual on how to replace the spool pins. That turned out to be the easy part. Getting the cover off the machine was another matter entirely. The service manual was a huge help with dismantling and reassembling the machine.
Machine apart with new metal spool pins installed.
Here’s the machine taken apart with the spool pins replaced. (See the red felt?) Loosen the tiny screw between the spool pins just enough to release the tension on the wire, slide in the new spool pins in place and tighten so that the spool pin catches the wire on the indention near the bottom of the spool pin. FYI – the end with 3 lines is the top of the spool pin. Test the spool pin (move it up & down just like you would normally) and adjust the tension on the wire as necessary. That’s it. Now, reassemble the the machine!
Helpful hints:
Enlarge the machine diagram from the service manual on the copier and tape the screws to the page as you remove them.
Use a magnetic tip screwdriver.
Have a pair of tweezers handy to hold screws in tight places.
If the machine disassembly diagram instructs you to loosen the set screw, that’s what they mean! Do not remove the screw completely. There is a reason for this!
On this model, there is electrical wiring that needs to be tucked BEHIND the spool pins and the tab to the left of the spool pins (the white box thingie) before you re-attach the rear cover.
This repair cost me $12.00 for parts and took about an hour to complete. Most of the time was spent figuring out how to disassemble/reassemble the sewing machine. The sewing machine cost $149.00 when I purchased it and it was worth it to me to attempt the repair myself. Worst case scenario – I would take the machine to the repair shop in pieces and pay the money to have them fix my screw-up. By DIY, I saved $75 plus gas and the 90 minute round trip to the sewing machine repair shop.
There are many interpretations of the popular saying, but this one is my fave:
Trust me, if you’ve done everything you can to “bloom” at work – with the job itself or certain people at the job – it’s not you…it’s the environment. Do yourself a favor and quit trying to make a square peg fit in a round hole. Move on.
Last night, Boomer and I attended the Summer Reading Celebration Kick-Off Party at the public library. One of my librarian colleagues hadn’t seen me for a few months and remarked how happy I looked. Same with a R.E.A.D. family from our former library in West Cobb who stopped by to see us. What really made my heart happy was a pair of students from my former school who came up, gave me a hug and told me how much “many people at my former school really missed me”. Believe me sweetie, there are many things I miss about my former school, but the new one has proven to be a much better fit.
Come Stitch With Me 